b>j)΄!Pԫ&;"kB޶}pSVT(wę!j x;-m@JnQ+պכ7MajfJͱ4jѲ撆RxZMz7vIW/dٞТזcZM~ji ߒsQzԠDW3Den"M+/B:-uIJ7j委9p='mANޭ=/B:-n&nUfqxZM~c Ϲ+,&ᾺܢF[(1*" ϒ"Jԧ<;b" "jܢF[x ,!q қ*]/؝27SMcs"ޭDQ/应ܢF_! :s" 7`F+SVTn"IJnQ/应B 4 wD"IJ׭-`S9DrjiEJ߅gJ应矁[xZM~n"IB؃!'Тѕ+(mIKʭ/|ϐܢF[xZMzG %嬩/c[[ Comments on: Qualcomm Quick Charge 2.0 on Xiaomi Redmi Note 3 https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/ My Space on the Internet Sun, 04 Jan 2026 20:54:24 +0000 hourly 1 https://wordpress.org/?v=7.0 By: angrymonk https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-1635 Mon, 11 Sep 2017 13:17:00 +0000 https://varunpriolkar.com/?p=30#comment-1635 okay I am still confused, so all the tweaks dev made to adjust current, voltage was possible due to presence of qc 2.0 (or 3.0)?

]]> By: varunpriolkar https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-418 Mon, 12 Dec 2016 19:33:33 +0000 https://varunpriolkar.com/?p=30#comment-418 In reply to Shubham Chauhan.

I am using the stock Cyanogenmod 2A kernel. The actual current reported by the USB multimeter is 1-1.25A, like I said in the article. Charging is 25-30% faster.

]]> By: Shubham Chauhan https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-401 Sun, 11 Dec 2016 15:39:06 +0000 https://varunpriolkar.com/?p=30#comment-401 In reply to varunpriolkar.

You had charged from 5% to 85%. Please tell that you had charged on 9v 2a or 9v 3a and also tell the time taken by the redmi note 3 to charge from 5% to 85%.

]]> By: Sharpened https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-39 Tue, 11 Oct 2016 14:26:44 +0000 https://varunpriolkar.com/?p=30#comment-39 Interesting results, thanks for the research!

]]> By: varunpriolkar https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-19 Fri, 30 Sep 2016 01:40:36 +0000 https://varunpriolkar.com/?p=30#comment-19 In reply to Teffy.

The temps are pretty reasonable and not much hotter than normal charging on Cyanogenmod with QC 2.0 so I don’t think it is risky at all. I’ve been using my Aukey charger almost exclusively. You’re right in the sense that any changes in charge rate need to be thoroughly tested before being committed to the codebase since this is something which can potentially damage phones.
I think on a 3A kernel the temps should be much higher and is not at all advisable.
EDIT: I kept it for charging from 5% to 85%. The temperature reported in the Ampere app was 41c, which is very reasonable.

]]> By: Teffy https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-18 Thu, 29 Sep 2016 14:24:55 +0000 https://varunpriolkar.com/?p=30#comment-18 Hey man, great post. Could you find the temps too when it’s charging? I’m guessing this is pretty risky, as the outer body won’t be able to handle the heat from the faster charge rate

]]> By: Kaushal Gaonkar https://varunpriolkar.com/2016/09/qualcomm-quick-charge-2-0-on-xiaomi-redmi-note-3/#comment-13 Wed, 28 Sep 2016 04:51:44 +0000 https://varunpriolkar.com/?p=30#comment-13 Thank you! Very helpful post indeed! Didn’t know that Redmi Note 3 Supports Quick Charging. Cheers!

]]>